1964–1966 Ford Mustang Manual Transmission Power Brake Booster & Hydraulic Kit
Ford Mustang
Upgrade your 1964-1966 Ford Mustang with factory manual transmission from manual to power brakes with this hydraulic conversion kit from LEED Brakes. Designed for Mustangs already equipped with front disc brakes, this 7" power brake booster kit adds power-assisted braking and a dual-bowl master cylinder while maintaining a factory-style appearance.
This complete power brake hydraulic kit includes a 7" brake booster, mounting brackets, installation hardware, dual-bowl master cylinder, brake pushrod, adjustable proportioning valve, and the brake lines needed to connect the new master cylinder to your factory 3-port distribution block. The adjustable proportioning valve allows you to fine-tune rear brake pressure to help prevent rear wheel lockup.
Designed for straightforward installation without modifications to your Mustang's factory strut tower or export brace, this power brake conversion kit includes detailed step-by-step instructions for a factory-style upgrade.
Important Fitment Notes:
- Designed for 1964-1966 Ford Mustangs with factory manual transmissions and original "Z Bar" clutch linkage only.
- For manual transmission vehicles equipped with aftermarket cable-style clutch linkage, use Power Brake Hydraulic Kit FC0002HK.
Looking for replacement parts for this kit? Shop replacement parts
Description
Upgrade your 1964-66 Mustang with LEED Brakes' 7-inch Power Brake Booster Kit for manual transmission. This kit is designed to convert your factory disc brake manual transmission Mustang to power brakes with a dual bowl master cylinder, maintaining a factory look without modifications to your strut tower or export brace. The kit includes a 7-inch Mustang brake booster, mounting brackets, installation hardware, a dual bowl master cylinder, brake pushrod, adjustable proportioning valve, and brake lines necessary to route from the new master cylinder to your factory 3-port distribution block. The adjustable proportioning valve allows you to fine-tune the pressure to your rear brakes, preventing rear wheel lockup. This kit provides a factory appearance and exceptional performance.
1964-66 Mustang 7-inch Power Brake Booster Kit for Manual Trans Key Features:
- Master Cylinder Bore Size: 1-1/16 inch
- Bowl Design: Dual Bowl
- Master Cylinder Material: Cast Iron
- Master Cylinder Finish: Natural
- Reservoir Included: Yes
- Reservoir Material: Cast Iron
- Master Cylinder Cap Included: Yes
- Brake Booster Type: Single Diaphragm
- Brake Booster Diameter: 7 inches
- Brake Booster Material: Steel
- Brake Booster Finish: Zinc
- Brake Pedal Rod Extension Included: Yes
- Mounting Hardware Included: Yes
- Quantity: Kit
Notes:
- Fits factory manual transmission cars only with "Z Bar" linkage.
- For manual shift cars equipped with an aftermarket cable-style clutch, use part number FC0002HK.
Upgrade your 1964-66 Mustang with this power brake booster kit for enhanced braking performance and reliability.
Click here to learn more about why LEED Brakes has added this warning to their products.
Details
- FC0042HK
- FC0042HK
- 887753639530
- LEED Brakes
- New
Shipping Information
- Item Requires Shipping
- 15.0 lbs.
- W10.5000” x H10.5000” x L18.2500”
Customer Reviews
Total Reviews (1)
You must login to post a review.
Reviewed by: Jesse04/21/2024 06:18AM
Product ownership: Less than 1 month
Purchased from: LEED Brakes
Comments:
I have a 66 Coupe with factory clutch rod for a t5 swap. The booster fits in between the firewall and shock tower and easily clears the rod. Slight trimming required but very easy to install. Directions were clear so make sure to read them! If I could post pictures I would, slight trim and fold of area on the export brace closet to shock tower was needed for me.